How many KVS mock tests should I take?

There is no fixed number. A practical plan is topic tests during the first two months, one full Tier 1 mock a week in the middle phase, and two full Tier 1 mocks plus one full Tier 2 simulation a week in the final six to eight weeks. What matters more is analysing every attempt.

Are KVS mock tests based on the new Tier 1 and Tier 2 pattern?

They should be. Tier 1 has 100 questions for 300 marks in 2 hours with 1 mark deducted per wrong answer. Tier 2 has 60 objective questions and 10 descriptive questions for 100 marks in 2.5 hours. Avoid series that still follow the old 180-question paper without negative marking.

Should I attempt every question in a KVS mock test?

No. In Tier 1, a correct answer gives 3 marks and a wrong one costs 1. Attempt questions you can solve or narrow down, and leave pure guesses. Your mock data will show how accurate your educated guesses are.

How do I practise for the KVS Tier 2 descriptive section?

Write timed answers on likely questions from your subject at least once a week. Structure each answer as a definition or statement, explanation, example or diagram, and a short conclusion, then compare it with a model answer.

Are previous year papers enough instead of mock tests?

Previous year papers show the real level of questions, but most come from the old single-paper pattern. Use them alongside mock tests in the current two-tier pattern, which train your timing, negative-marking decisions and descriptive writing.

Teaching Exams

KVS Mock Test 2026: Tier 1 and Tier 2 Practice Guide

Practise the current two-tier KVS pattern with full-length, sectional and descriptive tests, then analyse every attempt to raise your net score.

Sort by:

Farheen

Exam: KVS

Hindi Sahitya - 20 Most Important Questions

₹5

A KVS mock test is a timed practice paper built on the current Kendriya Vidyalaya Sangathan recruitment pattern. Under Recruitment Notification 01/2025, conducted by CBSE, selection runs through a 300-mark Tier 1 screening paper, a 100-mark Tier 2 subject paper and, for most teaching posts, an interview. Both written tiers are OMR-based and carry negative marking, so how you attempt the paper matters as much as what you know.

This page explains which types of mock tests to take and when, how to use them across your preparation, how to analyse each attempt and which mistakes to avoid. The guidance applies whether you are preparing for PRT, TGT or PGT, and whether you are waiting for the next notification or revising now.

Why KVS Mock Tests Matter for This Pattern
Types of KVS Mock Tests
Pattern to Practise In
How to Use KVS Mock Tests
How to Analyse a Mock Test
Benchmarks to Track
Common Mistakes
KVS Mock Tests on Testkart

Why KVS Mock Tests Matter for This Pattern

Negative marking changes strategy: Tier 1 gives 3 marks for a correct answer and deducts 1 for a wrong one. Only timed practice shows you when to attempt and when to leave a question.
Tier 1 is broad: Six sections, including two language tests, sit outside your teaching subject. Mocks expose which of them is pulling your score down.
Tier 2 has a written part: Ten descriptive answers carry 40 of the 100 marks. You need practice writing to time, not just choosing options.
The exam is on paper: Both tiers use OMR sheets, so bubbling answers accurately and managing time on paper is a skill in itself.

Types of KVS Mock Tests

Test type	What it covers	When to take it
Topic test	One topic, such as percentage, coding-decoding or a single subject unit	Right after finishing that topic
Sectional test (Tier 1)	One full section, for example 20 reasoning questions	Once a section is fully covered
Full-length Tier 1 mock	100 questions across all six sections in 2 hours	Weekly in the middle phase, more often near the exam
Tier 2 objective test	60 subject questions for your post	After each block of subject units
Tier 2 descriptive practice	10 written questions on your subject	Weekly once the subject base is ready
Full Tier 2 simulation	Objective and descriptive parts together in 2.5 hours	Final six to eight weeks
Previous year paper	Actual questions from earlier exams	Early for level-setting, again in the final phase

Choose post-specific Tier 2 tests. A TGT Mathematics paper and a PGT Mathematics paper are set at different levels, so a generic "KVS teacher" test is not enough.

Pattern to Practise In

Stage	Questions	Marks	Time	Marking
Tier 1	100	300	2 hours	+3, minus 1 per wrong answer
Tier 2 objective	60	60	2.5 hours for both parts	+1, minus 0.25 per wrong answer
Tier 2 descriptive	10	40	Shared with the objective part	Marked on content

Older mock series may still follow the 180-question paper without negative marking used in 2022-23. Check that any test series you use follows the current two-tier pattern.

How to Use KVS Mock Tests

Start with a diagnostic: Take one full Tier 1 mock before serious preparation. Treat the score as a baseline, not a judgement.
Build phase (weeks 1 to 8): Two or three topic tests a week alongside your study. Add one Tier 2 objective test after every few subject units.
Section phase (weeks 9 to 12): Sectional Tier 1 tests three times a week, one full Tier 1 mock a week and one set of descriptive answers a week.
Simulation phase (final six to eight weeks): Two full Tier 1 mocks and one full Tier 2 simulation a week, at the same time of day as your exam slot, on a printed OMR-style answer sheet where possible.
Last ten days: Fewer new mocks, more revision of your error log and two final full-length papers.

How to Analyse a Mock Test

Spend at least as long on analysis as on the test itself. Sort every question you did not get right into three groups:

Wrong answers: Note whether the cause was a concept gap, a careless slip or a guess. Concept gaps go back to your notes; slips need slower reading.
Slow questions: Correct but taking over two minutes in Tier 1. Find a shorter method or learn to leave such questions for the end.
Skipped but solvable: Questions you left that you could solve calmly afterwards. These show lost marks from poor time planning.

For descriptive answers, compare your answer with a model answer point by point: did you define the term, explain it, add an example or diagram and close with a clear line?

Benchmarks to Track

Metric	What to watch
Accuracy	Correct answers as a share of attempts; it should rise before attempts do
Net score after negatives	The real score, since negative marks can cancel many correct answers
Sectional scores	No section left far behind the others in Tier 1
Time per section	Whether reasoning or numeric ability eats into time for language sections
Descriptive completion	All 10 written answers finished within the time

The negative marking makes accuracy the key number. If a question has four options, a blind guess in Tier 1 has zero expected value, but ruling out even one option makes the attempt worth taking. Use your mock data to learn where that line sits for you.

Common Mistakes

Taking mocks without analysis: Ten analysed mocks teach more than thirty unreviewed ones.
Ignoring the language sections: Twenty Tier 1 questions sit in English and your chosen Modern Indian Language. Easy marks are lost when these are left to the end.
Skipping descriptive practice: Many candidates prepare only for MCQs and lose ground in the section that carries 40 percent of Tier 2.
Chasing attempts: Attempting more questions with poor accuracy lowers the net score.
Practising only on screen: Since the real exam uses OMR sheets, include some paper-based attempts.

KVS Mock Tests on Testkart

For timed practice in the current pattern, you can attempt KVS online tests on Testkart and use the section-wise analysis to see where accuracy and negative marks are affecting your score. Combine full-length mocks with KVS previous year papers to judge the real difficulty, and use the KVS syllabus to make sure every unit for your post is covered before the simulation phase. Once you are scoring steadily, check the KVS cut off page to set your target.